Yellow Wind Solar Hybrid Controller Inverter 1000W 48V Wind And Solar Inverter

Product Details:

Place of Origin:	Guangzhou,China
Brand Name:	HYE
Certification:	CE, ISO9001,RoHS
Model Number:	HY-CI10-48AWMMT

Payment & Shipping Terms:

Minimum Order Quantity:	1 PCS
Price:	Negotiable
Packaging Details:	standard export packing
Delivery Time:	3-5days
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:	3000sets/month

Contact Now

Detailed Product Description

Rated Output:	1000W	Rated Voltage:	48V
Rated Output Frequency:	50/60Hz	Inverter Type:	Pure Sine Wave Single Phase

1000W 48V Yellow Color Wind Solar Hybrid Controller Inverter For Famaily

Troubleshooting

Problem	Possible Cause	Solution
LCD has no display	Battery wire connection loose	Check connection, reconnect battery cables firmly.
	Battery voltage is lower than apparatus working voltage	1. Check battery voltage until battery voltage reaches to device working voltage.
	Battery voltage is lower than apparatus working voltage	2. Check battery connection, please reconnect correctly or increase battery banks.
	Fuse is burnt	Open box, then change fuse.
	LCD wiring connection loose	Open device box, reconnect LCD wiring.
Input over voltage protection	Battery is over-voltage	LCD display” HIGH BATTERY”, please disconnect all the wirings first and then re-connect them.
Battery over discharge protection	Battery is under-voltage	LCD displays “LOW BATTERY”. After battery voltage rises up to the ‘over discharge recovery voltage’, the inverter will recover automatically.
Overload protection	Load power exceeds device rated output capacity	LCD displays “OVER LOAD” constantly. Turn off the inverter and check the load, deduce some loads, then restart the inverter again.
Load Short-circuit	Short-circuit on the AC LOAD	LCD displays “OVER LOAD” flashing. Turn off the inverter, check load and wiring, remove the short-circuit hazard or damaged load, then turn on the inverter again
Over temperature protection	Improper installation	Installation should be in well-ventilated areas
	The vents are blocked	Make the area around fan-cover clean.
	Something wrong with the fan.	Contact manufacturer.
No AC output	Inverter switch is in “OFF” position.	Turn on the inverter
No AC output	LCD displays HIGH BATTERY, LOWBATTERY,OVER LOAD,HIGH TEMPERATURE	Please refer to the above corresponding solution.
No charging	Wind turbine, solar panel connections is loose	Re-connect and make sure wiring tight.
	wind turbine voltage and PV voltage are not reaching charging condition	Check the real output voltage and check whether is system configuration is correct.
	BRAKE	Switch the brake to “RUN” position.
	Battery full-charged	Check whether battery voltage reaches floating charge voltage or charge current reaches to unload current.

Technical Data

Product Model	HY-CI10-48AWMMT
Rated Wind Power	1kW
Rated Solar Power	1kW
Floating Charge Voltage	58V
Dump load Current	21A
Rated Output Power	1kW
Rated Battery Voltage	48V_DC
Over Voltage Shutoff	68V_DC
Over Voltage Recovery	66V_DC
Under Voltage Shutoff	43.2V_DC
Under Voltage Recovery	48V_DC
No-load Loss Current	≤0.5A
Output Wave	Pure Sine Wave
Display Mode	LCD
Cooling	Fan
Rated Output Voltage	220 V_AC
Wave Distortion	≤4％
Output Frequency	50±0.5Hz
Dynamic Response	5%
Power Factor	≥0.8
Over-load Capacity	120% 1 min; 150% 10s
Inverter Efficiency	Maximum 90%
Isolating Mode	Frequency Toroidal transformer
Noise (1 m)	≤40dB
Insulating Strength	1500VAC,1 min
Protection Function	Solar reverse charge protection , Solar reverse connection protection, Battery over voltage protection, Battery over discharge protection, Battery reverse connection protection, Output overload protection,Output short circuit protection, Overheating protection. Wind turbine automatic brake and manual brake.
Ambient Temperature	-20～+55℃
Working Altitude	≤4000m
Ambient Humidity	0~90%, without condensing

Company Picture:
Yellow Wind Solar Hybrid Controller Inverter 1000W 48V Wind And Solar Inverter

FAQ

1. Which payment terms are available?
A: Our company accept Telegraphic Transfer (T/T) payment for sample and bulk order.

2. How long will my order ready?
A: The delivery time is within 5 working days upon the payment receipt for the sample order.

3. I need the other accessories besides the wind turbine, do you also provide them?
A: Yes, we can supply not only the wind turbine but also the other parts of the system. E.g: controller, inverter.

Can you help me to design the system for my home and provide all accessories?
A: No problem. We can give you professorial technical advice and design the power system according to your request.